pub const STILL_M_S: f64 = 5.0;Expand description
The fitted speed under which the line stands still, m/s, either way: where it does, the pad is
re-read there, and a liftoff, a top speed and a fall read before it are forgotten. A run of bad
samples on the pad or a step there that stays can lift the line past LIFTOFF_RISE_M and
read a speed faster than the flight’s own top; the line stands still again once they leave the
window, or at the step’s new level (#1362). Bad samples close enough to ignition
leave no still window between them and the climb, and can then still be the top and cut early:
a known gap (#1441), from 0.2 s before ignition on the test’s flights, not bounded on
others. A dip in the boost can stand the line still
too, and the pad is then read again in the burn: the dip test still finds every cut after
burnout. On sets A and B’s first 200 synthetic
flights’ barometer logs with a cut (measured once, not committed), 98.8% and 98.4% of the pad’s
windows read under it, no stretch of the pad between windows that did lasted over 0.25 s, and
no speed from liftoff to the cut read under 17.6 m/s. A climb whose fitted top speed is under about 22 m/s
(this speed, the DROP_FLOOR_M_S fall and HOLD_S of gravity’s 7.4 m/s), or a little more
where drag slows it too, reaches this speed before its cut and is refused as never lifting off
(NoCut::NeverLifted); the walk before this rule cut such slow climbs. HPR Sim’s choice.