Struct SoundingProfile 

pub struct SoundingProfile { /* private fields */ }

An atmosphere built from a sounding or a forecast profile.

It serializes as its levels as given, its latitude and its wind interpolation, and rebuilds (and re-checks) everything else when deserialized.

Implementations

impl SoundingProfile

pub fn new( levels: Vec<SoundingLevel>, latitude_rad: f64, wind_interpolation: WindInterpolation, ) -> Result<Self, AtmosError>

A profile from levels, lowest first, measured at geodetic latitude latitude_rad, whose wind (if the levels give one) interpolates as wind_interpolation.

Errors

• AtmosError::NoLevels with no levels.
• AtmosError::HeightsNotIncreasing unless heights strictly increase.
• AtmosError::MissingBasePressure if the lowest level has no pressure.
• AtmosError::PressureNotDecreasing if a given pressure is not below the pressure of the level beneath it.
• AtmosError::IncompleteColumn if humidity or wind is given on some levels but not all, or a wind speed comes without its direction.
• AtmosError::Domain for a non-positive temperature or pressure, a relative humidity outside [0, 1], a negative wind speed, a latitude beyond ±90°, a non-finite value, or end levels whose offset standard atmosphere is out of range.

pub fn levels(&self) -> &[SoundingLevel]

The levels as given.

pub fn latitude_rad(&self) -> f64

The geodetic latitude the profile was measured at, rad.

pub fn pressures_pa(&self) -> &[f64]

The pressure at each level, Pa, with omitted ones filled in.

pub fn wind(&self) -> Option<&LayeredWind>

The profile’s wind, if its levels give one.

pub fn sample(&self, height_msl_m: f64) -> Result<AirSample, AtmosError>

The air at geometric height height_msl_m (see Atmosphere::air).

Errors

AtmosError::Domain if the height is not finite, is at or below −R(φ), or is so far above the Earth that the standard atmosphere has no height for its geopotential.

Trait Implementations

impl Atmosphere for SoundingProfile

fn air(&self, height_msl_m: f64) -> Result<AirSample, AtmosError>

The air at geometric height height_msl_m above mean sea level.

impl Clone for SoundingProfile

fn clone(&self) -> SoundingProfile

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for SoundingProfile

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<'de> Deserialize<'de> for SoundingProfile

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl PartialEq for SoundingProfile

fn eq(&self, other: &SoundingProfile) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Serialize for SoundingProfile

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl StructuralPartialEq for SoundingProfile