Enum DropReason 

#[non_exhaustive]
pub enum DropReason {
    NoData,
    OutOfRange,
    SamePressure,
    NotAbove,
    Thickness,
}

Why a row was left out of the profile.

Variants (Non-exhaustive)

Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.

NoData

A value is missing: the pressure, height, temperature, humidity, or either half of the wind.

OutOfRange

A value is out of range: a pressure below 0.1 hPa or above 1,200 hPa, a temperature outside −150 to 80 °C, a height outside −1 to 60 km, a wind speed below zero or above 300 m/s, a relative humidity below zero, a direction outside 0° to 360°, or a height with no geometric height.

SamePressure

It is not the middle row of its run of rows that fit with the same pressure, or the run is at the ground’s pressure.

NotAbove

Its height is not above the last row kept, or its pressure not below it.

Thickness

It is not in the chain of rows that fit: its height above the row before is not the thickness the two rows’ pressures and temperatures give (see THICKNESS_SHARE), or a longer or closer chain passes it by. Its pressure, height or temperature is likely wrong; but a good row beside bad ones that fit, within their allowances, can be passed by instead.

Trait Implementations

impl Clone for DropReason

fn clone(&self) -> DropReason

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for DropReason

impl Debug for DropReason

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<'de> Deserialize<'de> for DropReason

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>

where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Eq for DropReason

impl PartialEq for DropReason

fn eq(&self, other: &DropReason) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Serialize for DropReason

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>

where __S: Serializer,

Serialize this value into the given Serde serializer.

impl StructuralPartialEq for DropReason