Skip to main content

SUBSONIC_CP_AFT_CAL

Constant SUBSONIC_CP_AFT_CAL 

Source
pub const SUBSONIC_CP_AFT_CAL: (f64, f64);
Expand description

How far aft of the measured center of pressure HPR Sim’s sat on NASA TN D-4013’s short Arcas Robin model below the transonic join, calibers: rounded outward from 0.11705 (Mach 0.6) and 0.91170 (Mach 0.8), against the reading’s ±0.0546, from validation/fixtures/aero/normal-force-vs-mach.json, whose figures a test recomputes from the committed designs and the tunnel’s points. The fins are still on Prandtl-Glauert at both speeds, so the join is not the cause. The long model reads the other way (0.360 calibers forward at Mach 0.6, and +0.067 at 0.8, inside its ±0.071), so one measured model of two supports the warning. Both figures are the committed basis, the report’s faired curve against HPR Sim fitted over −2° to 2°; fitted on the tunnel’s points over the same angles, they are −0.03 and +0.87 calibers over −2° to 2°, and −0.49 and +0.08 over −3° to 4° (docs/research/arcas-fin-share-cp-station.md §4). The warning quotes the committed basis, the largest, the side that doesn’t flatter the margin, and gives the −3° to 4° fit’s 0.08 beside it.